HB42 Restore Epoxy Wood Filler NEW
HB42 Restore – Epoxy Resin Wood Filler in 4 hour or 1 hour cure
HB42 Restore 1 Hour Epoxy Resin Wood Repair is ideal for splicing timber components, offering excellent adhesion and it holds its shape throughout the curing process. Designed for when a speedy repair is required, it sets within 1 hour, making it perfect for smaller repairs to rotted or damaged wood. Its thixotropic, low-sag consistency allows for easy shaping and clean cut-off, ensuring precise application and a smooth finish.
“Rapid cure, excellent adhesion, and holds its shape”
How to Use
HB42 Restore 4 Hour
HB42 Restore 4 Hour Epoxy Resin Wood Repair is ideal for splicing timber components, offering excellent adhesion and holds its shape throughout the curing process. Designed to turnaround jobs within a day, it sets within 4 hours, making it perfect for larger repairs to rotted or damaged wood and is particularly suitable for vertical or overhead applications. Its thixotropic, low-sag consistency allows for easy shaping and clean cut-off, ensuring precise application and a smooth finish.
HB42 Restore 1 Hour
HB42 Restore 1 Hour Epoxy Resin Wood Repair is ideal for splicing timber components, offering excellent adhesion and it holds its shape throughout the curing process. Designed for when a speedy repair is required, it sets within 1 hour, making it perfect for smaller repairs to rotted or damaged wood. Its thixotropic, low-sag consistency allows for easy shaping and clean cut-off, ensuring precise application and a smooth finish.
HB42 Restore 4 Hour
Cartridge Application:
- Press the clutch plate at the rear of the extrusion tool and pull the pistons fully back.
- Insert the cartridge, ensuring the smaller tube enters first (a piston plate is designed to fit this tube).
- Remove the end cap and dispense the required amount onto a mixing board.
- Wipe away excess material from the nozzle and replace the cap after use.
Pot Supplied Product:
- Resin base and hardener are supplied separately.
• Mix at a ratio of 3 parts base resin to 1 part hardener, by weight or volume.
• Use clean spatulas to avoid cross-contamination and always replace lids immediately.
Mixing Process:
Blend thoroughly with a putty knife or similar tool until the green tint disappears and a uniform color is achieved. Begin by applying small amounts to avoid trapping air, then build up the repair with larger volumes. Smooth the surface before leaving it to set.
HB42 Restore 1 Hour
First, remove the decayed timber and ensure dust is removed. Next prime the wood by applying the HB42 Restore stabiliser and finally apply the filler (mixing ratio 1:1 resin to hardener) and shape accordingly. Working time is 5 minutes at 20°C. Allow to dry for 1 hour, then finally sand and paint.
Perfect for substantial repairs to decayed or damaged timber
Find your nearest stockist